Using a quantum computer alongside a supercomputer, scientists have developed a breakthrough pathway for modeling the physics inside a fusion reactor. The world-first experiment could help clear a path to developing clean, abundant nuclear power and solving the global energy crisis, the researchers said.
Using hybrid quantum computing and artificial intelligence (AI) methods, scientists with IBM and Oak Ridge National Laboratory (ORNL) have blueprinted how to make tritium, an extremely rare isotope of hydrogen that’s critical to the fusion process.
Although their research — uploaded June 29 to the preprint server arXiv — has not been peer-reviewed, the researchers say it’s the first time that different kinds of computing elements have come together to propose the most effective way to create this material.
Fusion reactors are experimental power sources that create energy by fusing atomic nuclei. The heat produced in the subsequent nuclear reaction is then harnessed as energy. This method produces no carbon byproducts or long-lived radioactive waste, making it one of the cleanest potential forms of mass energy production.
It’s projected that, at scale, a single fusion reactor could produce about 4 million times as much energy as a coal-burning facility and around four times the amount of energy as a modern nuclear fission reactor.
Current attempts at building a viable fusion reactor have resulted in numerous laboratory experiments that prove the technology works, with magnetic confinement reactors, such as tokamaks, widely considered the front-runner. But many engineering challenges remain before the first commercial reactors could come online.
Turning seawater into fuel
The base fuel for nuclear fusion reactors is a hydrogen isotope called deuterium, which is commonly found in seawater. It’s estimated that there are 33 grams of deuterium in every cubic meter of seawater.
Get the world’s most fascinating discoveries delivered straight to your inbox.
But deuterium is only half of the equation. Nuclear fusion also requires tritium — a heavier hydrogen isotope — and the fusion released from just 1 gram (0.04 ounces) of deuterium-tritium fuel equals the energy from about 2,400 gallons (9,100 liters) of oil, according to the U.S. Department of Energy.
Unfortunately, tritium, a radioactive isotope, is extremely rare; only 44 pounds (20 kilograms) of it is produced on Earth each year, and its 12-year half-life makes it difficult to use in nuclear power plants.
Instead, scientists must painstakingly produce tritium in nuclear reactors by bombarding lithium atoms with neutrons. It’s then superheated and bound with powerful magnets into a whirling ring of plasma within a tokamak, a special fusion chamber designed to shape and heat plasma using magnetic fields.
A diagram showing the process of nuclear fusion.
(Image credit: Designua | Shutterstock)
Scientists add more deuterium and then bash the tritium and deuterium together, causing them to fuse into helium. The force of this reaction creates heat that’s converted into energy.
The current bottleneck lies in creating enough tritium to sustain fusion long enough to produce energy. But modeling the particle physics and chemical reactions involved in the tritium-creation process has proved beyond the capabilities of classical supercomputers.
In the new study, however, scientists say they have addressed this bottleneck by simulating nine molecular configurations of a liquid salt that contains fluorine, lithium and beryllium (FLiBe) — one of the leading candidate materials for extracting tritium.
This is the first time quantum computers have been used to model reactions inside a fusion reactor. If perfected, FLiBe could provide a near-limitless source of fuel for nuclear fusion reactors, they said, but the chemistry involved is incredibly complex.
Demystifying complex chemistry
A “blanket of molten salt” made of FLiBe is wrapped around the nuclear reaction inside a fusion reactor, IBM researchers told Live Science. This provides both a fuel source and a thermal shield for the device.
To create enough tritium, the researchers had to calculate the physics involved while a process called “neutron bombardment” constantly altered the blanket’s chemistry. Designing a salt that holds up under competing demands and keeps releasing tritium is a key problem in building this kind of reactor.
“If tritium grabs onto fluorine in the salt, it forms tritium fluoride, which is corrosive and stubborn to remove,” the researchers explained. “If it binds to another tritium atom to form a gas, it bubbles out on its own. Predicting which way the reaction goes means modeling the interaction between tritium and the salt with high precision and accuracy that is challenging for classical methods.”
Because no ordinary computer can perform the necessary calculations, the team used a combination of AI running on the Frontier supercomputer at ORNL, alongside quantum computing algorithms running on an IBM Quantum Heron quantum processing unit (QPU) in New York. The resulting workflow demonstrated a proof of concept for offloading complex chemistry computations to a quantum computer.
That workflow relied on a technique called wave-function-based embedding, which fragments the calculation into easier-to-calculate clusters, the scientists said in the study. They used classical computers to solve the smaller clusters and passed off the more difficult chunks to a quantum computer. The classical computers then stitched the molecule back together.
This is a method that study co-author Kenneth Merz, a biochemist and principal investigator at Cleveland Clinic Research, pioneered in previous research. Earlier this year, in collaboration with IBM and the Japanese national research institute RIKEN, he used quantum computers to calculate the structure of a 12,635-atom protein.
Fusing quantum and AI
In the new study, the researchers tested their model against known molecular configurations that were already solved by a nonhybrid classical system and determined that the accuracy was maintained with the addition of quantum computations.
This proof of concept should serve as a direct pathway for scaling the models used to predict tritium production within fusion reactors, potentially solving what may be the biggest hurdle to large-scale fusion energy production.
The broader workflow the scientists outlined in a technical blog post involved three stages. First, AI agents proposed and screened many candidate salts from the ORNL database, and for each candidate, calculations estimated various qualities in the tritium breeding process, including how much fuel the salt would make under neutron bombardment.
The most promising salts then went to a supercomputer, which modeled them atom by atom, using the density functional theory (DFT) process to approximate how a molecule’s electrons would arrange themselves. These are expensive simulations, so the scientists used “AI stand-ins” trained to reproduce the physics to run them fast enough to be useful. The third stage brought in the quantum computer to figure out where the tritium would bind, which is a shortcoming for DFT.
In the future, the research team will model larger molten-salt systems and study more molecular configurations before evaluating whether AI can slash the time it will take to find a promising molten-salt material.
The wider aim, the scientists told Live Science, is to build a reliable computational pathway for fusion-materials discovery that can help researchers predict how well a blanket material breeds tritium, whether that tritium can be recovered, and how the material may perform in the extreme environment of a fusion reactor.
Das, S., Santos, T. J. P. D., Bhowmik, S., Bazayeva, M., Li, Z., Shajan, A., Kaliakin, D., Liang, F., Bryantsev, V. S., Geist, A., Gomez, A. M., Pellegrini, T., Walkup, R., Seelam, S. R., Motta, M., Merz, J. K. M., & Beck, T. (2026, June 29). Quantum Computations on Fusion blanket molten salts. arXiv.org. https://arxiv.org/abs/2606.30402
Can you match these ancient devices to their pictures? Find out with our computing quiz!
